Want a More Affordable Home? Don’t Overlook Condos.


When you picture buying your first home, chances are you’re imagining a traditional single-family house with its own yard, maybe a garage, and little extra room to grow. But with affordability still tight, getting everything on that list right away may come with a higher price tag than you’re comfortable with right now.

So, if you’re running the numbers and buying a house like that feels like a stretch, there may be another way in. A condo.

Because in a lot of markets, condos come with a significantly lower price tag. And that could make them a smart way to get your foot in the door.

Condos Can Cost Less Than You Think

According to a recent study by Zillow: 

“Condos are the most commonly affordable home type in virtually every metro. At the starter level, the savings can be pretty significant. Nationally, starter condos average $197,468 — that’s about 6% less than the typical starter home.”

And depending on where you live, the difference can be much bigger. 

Zillow identified metro areas where typical starter condos are priced significantly below the estimated home price a median-income household could afford. Here are the top 10 according to that research (see chart below).

In Houston, the gap is at its widest. There, a typical starter condo was valued at about $85,600 – 72% below the price considered affordable based on the area’s median household income.

a blue and white chart with white text 

Of course, every market is different. But the bigger point is this: if you’ve only been searching for traditional single-family houses, you may be overlooking some of the more affordable options on the market.

And even if your city didn’t make this list, that’s okay. The trend holds true in many places across the country. Here’s why.

A Condo Could Give You a Different Way In

Part of the reason condos can cost less is pretty straightforward. They’re typically smaller. And less square footage can mean a lower purchase price.

So, if you can make do with a bit less space or you’re coming from a smaller apartment now, this can be a great way in. Plus, on the upside, you won’t have to buy a ton of furniture to fill out a bigger house. You can get a potentially lower price up front and spend less once you move in because you’ll need less new stuff to fill that empty space.

And more buyers are making that trade off on space to offset the current affordability challenges. Ali Wolf, Chief Economist for New Home Source, explains:

“In addition to favoring smaller floor plans, more consumers are showing a willingness to live in an attached home. This shift is not driven by a preference for shared walls, but by a pursuit of value.”

That’s really the heart of it. Looking at condos isn’t necessarily about wanting less. It’s about finding another way to make your move happen with the budget you have.

Don’t Rule Out an Option That Could Work

If you’ve been struggling to find a house you like at a price you can comfortably afford, talk to your agent about adding condos to your search.

You may find something in a neighborhood you thought was outside your budget. You could get access to amenities you wouldn’t otherwise have. And you may be able to become a homeowner sooner rather than waiting for the numbers on a single-family house to work.

While there are trade-offs like shared walls, less outdoor space, and an HOA fee to factor into your monthly budget, maybe that’s worth it if you finally get your own set of keys.

Plus, a lot of the times, a condo community comes with great amenities like pools, gyms, and the condo association handles at least some of the maintenance. Which is closer to what you’re used to from your apartment – it could make the transition to homeowner not just more affordable, but that much easier too.

Bottom Line

The first home you buy doesn’t have to be a single-family house. If affordability has been holding you back, talk to a local agent about expanding your search and see whether a condo could fit the price point you’re looking for.




Source link

The 1865 John J. and Emma G. O’Brien House at 208 East 78th St: Colorful lives in a narrow home


Have you ever passed by an interesting residential building in New York City and wanted to know more about its history? In this series, Brick Underground teams up with Tom Miller, creator of Daytonian in Manhattan, a blog about Manhattan buildings and other historic architecture. Each week, we run an excerpt from the Daytonian’s archives with a link to the full article.

Howard A. Martin purchased 200 feet of property in 1861 along East 78th Street, which at the time existed only on paper. His deed included a $128 assessment (about $4,830 in 2026) to open the street. Martin divided the parcel into 15 building plots, each 13-feet, four-inches-wide. His builders, Warren and Ransom Beman (possibly brothers) and John Buckley, were most likely responsible for the charming design of the challengingly narrow homes.   

Martin’s project stalled when, that same year, the Civil War broke out. Thousands of laborers marched off to fight and construction in New York City ground nearly to a halt. Finally, in 1865 (the year the conflict ended) construction of the 15 identical houses was completed. Each rose three stories above high basements. Two bays wide, their red brick facades were trimmed in brownstone. Each of the openings was fully arched. Bracketed Italianate-style cornices graced the rooflines.

Possibly strapped for money because of the delay, Martin had sold the unfinished project to investor William H. Brower. It appears, because of the regular turnover in occupants, he rented 208 East 78th St.

Interestingly, despite its narrow proportions, two families initially occupied the house. William Rosenberg and Jacob Weinman were partners in three dry goods stores. The families remained until 1869, when an auction of their household goods was held.

The Morris Jacobson family occupied the house in the 1890s. Jacobson was a real estate operator and ran his business from the house. It appears that Moses Hirsch Sr. purchased No. 208 at the turn of the century as a wedding present for his son, Moses Jr. and his bride, the former Hannah Rothschild. They would suffer heartache four years later. On February 3rd, 1905, Ira Arnold Hirsch died at the age of three months.

The following year, Moses Hirsch sold 208 East 78th St. to John J. and Emma G. O’Brien. The couple had one son, Thomas K.

Born in 1862, John J. O’Brien was a fascinating figure. In 1884 he earned the title of “amateur wrestling champion of the United States,” according to The New York Times. He never totally abandoned the sport. He was a judge at wrestling events, including the 1920 Olympic Games in Belgium.  

O’Brien sat on the last New York Board of Alderman prior to the consolidation of the boroughs in 1898. That year he was appointed an official of the Department of Sanitation. He was also the head of the John J. O’Brien Printing Co.

In 1964, the four 1865 houses to the west were demolished. Those at the far east of the row were razed before 1900, replaced with a tenement building. There were now just five houses, including 208 East 78th St., that survive.

At some point the homeowners of the row agreed to paint the brownstone trim white, giving the charming residences a unified appearance. For more on the property and the interesting people that lived here, check out the full article.

 





Source link

Norwegian undersea cable builder pitches 2,800-mile transatlantic data link between Canada and Europe to bypass the US — Canadian majority partner sought to help fund and build new $620 million fiber connection to reduce reliance on American routes


A Norwegian company building fiber networks and data centers across Europe is looking for a majority partner to help fund and build a transatlantic undersea cable that would connect Canada with Europe directly, bypassing the United States. The project follows worsening relations between Washington and Ottawa, with the Canadian government looking to reduce direct reliance on its immediate neighbor, Bloomberg reports.

Project Leif Erikson, if it goes ahead, would stretch more than 2,800 miles, starting at the southern tip of Norway and ending up at Happy Valley-Goose Bay in Canada’s eastern province of Newfoundland and Labrador. From there, it would continue underground over Canadian territory, passing through Quebec before reaching Montreal.



Source link

Which repairs are co-op and condo owners responsible for? What do buildings take care of?


When you own a New York City apartment, some things inevitably need fixing. But it can be difficult to know what are you responsible for and what your building is on the hook for. For example, you may need help figuring out whose job it is to replace the windows. Or what the board’s role is if there’s water damage from a neighboring apartment.

Answers to these questions depend on whether you own in a co-op or a condo building. When you buy a condo, you own the property and get a deed. A co-op building, on the other hand, is structured as a corporation with a board of directors, so instead of receiving a deed you are a shareholder.

As a co-op owner you sign a proprietary lease, an agreement that has similarities to a lease in a rental building. 

In addition, for NYC renters, there’s a set of rules called the warranty of habitability that details the services a landlord must provide in order to keep the building and apartment safe and livable at all times. These rules also protect co-op owners. In a condo building, there’s no warranty of habitability between the board and unit owners.

Here are some of the most contentious maintenance issues and guidance on who typically is responsible for them.


[Editor’s note: A previous version of this post was published in September 2021. We are presenting it again with updated information for August 2025.]


Window replacements

In a co-op, a shareholder’s responsibilities are spelled out in the proprietary lease. Marc J. Luxemburg, an attorney at Gallet Dreyer & Berkey who specializes in co-op and condo law, said a good guide is to use what he called “the rule of thumb nail.” If you put your thumb nail against the wall and wiggle it into the plasterboard, you can get it a fraction of an inch into the wall. That’s about as far as the shareholder’s responsibility goes. 

“Anything you can touch with your finger or finger nail is a shareholder’s responsibility,” he said. 

So the structure of the window and the maintenance of the exterior is typically the responsibility of the board but the shareholder will have responsibility for maintaining the interior. 

“Nine times out of 10, windows are the responsibility of the co-op,” said attorney Andrew Freedland, a partner and co-chair in the condo and co-op practice at Herrick, Feinstein. He said that in most cases, if the window frames are in disrepair, a co-op board has a responsibility to maintain them. However, the majority of co-ops were converted in the 1970s and 1980s, and in some cases the proprietary lease has been updated. If your lease has been amended, responsibility may have been transferred to the shareholders.

It’s important to remember that the warranty of habitability doesn’t provide for all situations involving a window. A co-op board has a responsibility to make sure apartments are fit for human habitation but isn’t responsible if damage is caused by a tenant or shareholder. For example, if a resident throws a bottle and it breaks the window, the co-op building wouldn’t be responsible. And if the window is scratched or discolored in some way, the damage would not fall under the warranty of habitability.

Pro Tip:

Window and Door Pro specializes in the complexities that come with NYC—co-op approvals, landmark restrictions, pre-war constructions. Get a quote here. 

Water damage

If there’s a plumbing issue that’s unrelated to a fixture within the apartment, in most cases the responsibility for repairs will fall on the co-op board. Again, you’ll want to take a look at your proprietary lease to make sure. If the problem is inside the building walls, it’s typically a co-op’s responsibility under the lease. If it occurs outside of the walls, such as an issue with the faucet, toilet fixture, or sink, usually it’s the shareholder’s responsibility. 

That’s why it’s important to have homeowner’s insurance. Freedland said a standard ’80s-style lease does not typically have a requirement that shareholders get insurance but it’s one of the most frequently requested proprietary lease amendments. 

But what if you’re the neighbor in the scenario above and the shareholder who’s responsible is being slow to make repairs? Perhaps you’re worried there’s mold growing in the walls. In some cases it makes sense for a board to assume responsibility for basic repairs to save time. The board may fix the problem and pass on liability later. One reason: The board also has a responsibility under the warranty of habitability to assist affected neighbors. 

Again the situation is different for condos: In a condo you have to fix it yourself and sue a culpable neighbor or board later. However, to be successful, you’d need to prove negligence on their part.

Paint and wallpaper

Landlords—and by extension co-op boards—are required to paint or cover apartment walls with wallpaper. Your apartment walls should not be exposed sheetrock. Very often the proprietary lease will, however, say shareholders are responsible for painting.

Perhaps the remedial mold work from your neighbor’s water damage requires a hole to be made in your wall. A co-op board has a responsibility to make sure the wall is properly repaired and painted. Are they required to rehang your expensive wallpaper? No. You’ll likely get a coat of primer.

As a shareholder in a co-op, it’s possible you could call 311 and get a violation against a board if the paint or wall covering in your apartment is bad shape but that is an aggressive move that can backfire.

“The legal codes don’t supersede the proprietary lease,” Luxemburg said, so what might happen is the co-op board will, if forced by a judge, paint your apartment to meet the code but then charge the shareholder for the work. You might even have to pay the legal costs. 

These are not issues that are relevant to condo owners. However, if you rent out your condo and become a landlord, you’ll have obligations to your tenants under the warranty of habitability. 

Electric wires, steam risers, and your front door

If you’re using the “rule of thumb nail” to determine who is responsible for what, Luxemburg pointed out there are a couple of exceptions.

The first: Electrical wires in your walls. You might not be able to physically touch the wiring but it is typically a shareholder’s responsibility. This means if you change any of the electrical systems in your apartment, you take responsibility for the quality of the work.

Another exception in a prewar co-op building are the steam risers. These are pipes that are very often exposed and run from floor to ceiling to release steam from the boiler. The maintenance and repair of these risers is a co-op board’s responsibility. 

The front door of your co-op unit is another exception. “It belongs to the board,” Luxemburg said, although the painting and decoration falls on the shareholder. The door must be fitted with a standard lock but if the shareholder adds a second, for additional security, that is not the board’s responsibility.

—Earlier versions of this article contained reporting and writing by Emily Myers.

 





Source link

Modder finishes nine-year Xbox 360 voltage glitch mod with a $4 microcontroller, cracks the console open — tiny microcontroller dumps NAND and flashes timing files to bypass CPU cryptography


The Xbox 360 has been cracked open multiple times over the years, and almost every time Microsoft‘s updates plugged whichever hole let hackers through. The first method was modded DVD firmware in 2006, a hypervisor hack followed in 2007, and a wiring hack exposing JTAG debugging ports was revealed in 2009. The longest-lasting physical hack was 2011’s CPU force-reset exploit. That maneuver needed specialized hardware along with a voltage-glitching chip, but an enterprising techie showed how it can be performed nowadays with the assistance of a Raspberry Pi Pico, costing all of $4 (or about 5€ / £5). The crack marks the culmination of a nine-year effort by the modder.

To get the elephant out of the room, yes, just last week the PeerPressure Xbox 360 persistent soft-mod was released. But we’re here to talk signals and wires. The aforementioned reset exploit involves sending a teeny weeny tiny signal directly into the CPU’s reset pin. You’d think this would do what it says on the label, but what happens instead is that the CPU executes the current instruction incorrectly.



Source link

ASML’s employee-only High-NA EUV Lego kit gets an open 810-piece fan replica — custom MOC dodges $700 eBay prices with working wafer tray and vacuum pumps


ASML launched a Lego kit version of the TWINSCAN EXE:5000, the world’s first High-NA EUV machine, in December 2024. Since ASML only sells products like these to employees, the company canceled orders from non-employees, making the kit even more desirable for collectors. Current eBay listings show a Buy It Now price between $500 and $700, which is significantly higher than the $230 that the company asks for on the official website. However, X user @lithos_graphein shared a recreation of the kit available on Rebrickable, which added some tasteful modifications.





Source link

The Biggest Credit Hurdle for Renters Who Want To Buy


What’s the biggest payment you make every month? If you’re a renter, it’s probably your rent. 

But did you know that you can pay your rent on time, every time, for years, and it may never show up in your credit history? It’s pretty frustrating, especially if you’d like to buy a home someday and you’re trying to build your credit.

The good thing is that’s changing right now. Here’s what you need to know and why it could open a door you thought was closed.

The Problem for Would-Be Buyers

You’re not the only one frustrated. According to Zillow, nearly a third of applicants (32.88%) get denied a mortgage due to insufficient credit history – not missed payments or too much debt. Just not enough credit history for a lender to say “yes.”

It’s the most common hurdle would-be buyers have. As Zillow explains:

“Nearly one-third of mortgage applicants are denied a loan because of insufficient credit history, making it the most common reason for a denial.”

a blue and grey pie chart

But there’s finally a way in now that how credit gets measured is changing.

The Good News: Credit Is Getting Broader

As Michael Sherman, General Manager and Senior VP at Zillow Rentals, explains:

“Affordability is the headline in housing right now, and access to financing is a very important part of the story. Credit history is a barrier standing in the way of too many potential buyers. Rent reporting is a direct way to address that.”

Here’s what Sherman is talking about. New credit models are emerging that take on-time rent and some utility payments into consideration to help renters get credit for the bills they already pay.

VantageScore is one company with a new credit model that has been approved for use by the Federal Housing Finance Agency (FHFA). And that roll out could have a big impact on renters like you.

A recent study by VantageScore found that nearly 4 million U.S. renters could finally become eligible for a mortgage if their on-time rent payments were counted as part of their credit history. Now, this isn’t a guarantee that it will suddenly count for every would-be buyer, but it does crack open the door.

Here’s the catch though, you still have to walk through it.

Counting Rental Payment History Is Not Automatic

There are more options available to build credit, but you have to be proactive. Your rent won’t necessarily count unless you make sure it does. And the sooner you take credit for your payments, the better.

Here’s how to get started based on a few tips from Experian, the Consumer Financial Protection Bureau (CFPB), and FICO:

  • Ask your landlord or property manager if your rent is being reported. If it’s not, opt in. 

  • If your landlord doesn’t offer rent reporting, there are services available. Be sure to check fees and which bureaus they provide your data to.

  • Check your credit reports for errors. Mistakes happen and fixing them is one of the quickest ways to strengthen your profile. The CFPB offers step-by-step instructions on how to fix errors on your report.

  • Follow basic, important credit rules. Pay your bills on time, keep your card balances low, and don’t apply for a bunch of new credit at once.

  • Don’t close any accounts – even if you have paid them off and don’t use them often.

  • Diversify your profile by getting a secured credit card or becoming an authorized user on someone else’s account to help you build history beyond rent.

These steps take a little time and effort, but it could be worth it if it starts building up your credit history. 

Just remember, not every lender uses the same scoring model and there are more changes on the horizon. So, the sooner you get credit for the work you do, the better. 

Even if you’re not sure when you might be ready to buy a home, talking to a lender is a good place to start. A professional loan officer will help you make a plan and help you figure out a timeline to get ready to officially apply and buy.

Bottom Line

The credit landscape is changing, but action is required on your part. You have to take credit for what you do. And the sooner you get started, the better.

Ready to see where you stand? A quick conversation with a loan officer costs you nothing and could show you you’re closer to owning a home than you think.




Source link

6 things you really need to know about your NYC radiators


If you live in an older New York City building, you’re probably already familiar with the random hissing and clanking of your old-fashioned cast-iron radiator. They’re not just noisy; they can get very hot—or worse, not heat up at all.

NYC’s minimum heat requirements apply from October 1st through May 31st. When the outdoor temperature falls below 55 degrees between 6 a.m. and 10 p.m., your landlord must maintain an indoor temperature of at least 68 degrees. Overnight, from 10 p.m. to 6 a.m., the indoor temperature must be at least 62 degrees, no matter the outdoor temperature.

No heat, or your place just isn’t warm enough? Read on for Brick Underground’s cheat sheet on quieting a noisy radiator and making it more attractive and functional.

Also: Read Brick’s guide to getting your management company or landlord to comply with the rules. 


[Editor’s note: An earlier version of this article was published in October 2024. We are presenting it again with updated information for October 2026.]


1. Use the knob to turn your radiator on or off

Many people mistakenly believe the circular knob on a steam radiator regulates the temperature, but it’s actually just an on-off switch, said Peter Varsalona, principal and vice president of RAND Engineering & Architecture. “It’s not designed to be a control valve.”

Typically, you turn the knob clockwise to turn the heat off and counter-clockwise all the way to turn it on. If the radiator is off, it shouldn’t make any banging sounds.

“When you have it opened halfway, that can lead to banging problems,” Varsalona said. Improperly pitched piping or hot steam hitting cold water can also cause loud noises. 

If your radiator knob spins and spins and won’t tighten in either direction, have your super fix it. You can also try propping up one side of the radiator so it slopes toward the boiler and water doesn’t become trapped. Regardless, expect some clanging when the heat kicks in in the morning. 

2. Install a valve to control the heat 

Hot water (aka hydronic) supply systems have a much broader temperature range than most low-pressure steam systems, said Zaid Matalka, an engineer at engineering consulting firm P.A. Collins PE. Because steam operates at about 212 degrees Fahrenheit, individual radiators can be difficult to regulate.

“Ultimately, the lack of control in these steam heat systems is why hot water systems are a lot more popular nowadays,” he said. 

If you’re dealing with steam heat, it helps to know which of two systems is in your building. In a one-pipe system, steam enters the radiator and condensate drains back through the same pipe. In a two-pipe system, steam enters through one pipe and condensate exits through another. You can usually identify your system by looking at the pipes connected to the radiator. The distinction matters because the controls and any additional equipment needed to regulate heat vary by system.

Whether your building uses steam or hot water, a thermostatic radiator valve (TRV) senses the room temperature and adjusts the flow of hot water—or, in compatible steam systems, the release of steam or air—to maintain the desired temperature. This can reduce overheating and wasted heat, though the right valve and level of control depend on the heating system type.

For a more high-tech solution, Kelvin’s Cozy Custom is a smart radiator cover that provides room-level temperature control in buildings with one- and two-pipe steam and hot water heating systems. Rather than regulating water or steam flow through a valve, the Cozy controls how much heat the radiator releases into the room, improving comfort and energy efficiency.

Even with radiator controls, however, some apartments—particularly those on higher floors—can remain uncomfortably hot on mild winter days. Steam pipes running between the boiler and radiators also release heat, which can be difficult to control. (More on that below.)

3. ‘Bleed’ the radiator if it is cold or noisy

If your hot water system is running but a radiator remains ice cold, trapped air may be preventing hot water from circulating. Excessive noise—like a gurgling sound—can also indicate trapped air. In either case, the solution may be “bleeding” the radiator to release the air.

If you’ve never done this before, avoid doing it yourself. Opening the valve incorrectly can cause scalding-hot water to gush out. Contact your super and tell them you have a problem with your radiator. If they determine that bleeding the radiator is required, watch the process so you can do it safely in the future.

With steam radiators, banging often signals a different problem: condensate (water formed when steam cools) may be getting trapped instead of draining properly. Your super or plumber may need to repair or replace the steam trap (in a two-pipe system), the air valve (in a one-pipe system), and perhaps the radiator shut-off valve, said P. Andrew Collins, principal and founder of P.A. Collins PE.

Never try to regulate steam radiators by partially closing their shut-off valve; throttling it can interfere with proper operation and damage the valve seat. (This advice doesn’t apply to hot water systems.) Leave it fully open or fully shut, Collins told Brick.

4. Spruce up your radiators 

If your radiator is an eyesore, you may be able to improve its appearance with a fresh coat of paint or a radiator cover. Some companies even offer custom-design covers. A properly fitted cover should allow heat to circulate and leave the radiator’s valves accessible.

Before painting a radiator or a landlord-owned cover, check your lease and get your landlord’s permission. If you decide to paint, use a product formulated for the radiator’s material and operating temperature, and follow the manufacturer’s instructions. 

You may also hire a professional to restore an existing radiator. Depending on its condition, the job may involve sanding, filling blemishes, stripping old paint, and applying a fresh coat. Again, get your building’s or board’s approval first. 

Keep in mind that radiator covers are generally an optional cosmetic improvement, not something landlords must provide. However, under Local Law 151 of 2025, NYC requires annual steam radiator inspections in certain residential buildings, with particular attention to apartments where children under six reside. If you’re concerned about a radiator’s condition or safety, contact your building management.

5. Replace old radiators 

Co-op owners often replace large, cast-iron radiators with smaller, stylish ones, Varsalona said. (Hudson Reed is a designer favorite for hot water systems; Brooklyn-based Governale offers steam and hydronic options.) Keep in mind that radiators and radiator piping may be considered “common elements,” so you may need board approval to replace them.  

A note of caution: After installing new radiators, always turn them on and check for leaks while your contractor or super is still on the premises to help fix any problems. A leak usually signals an improper pipe connection that, if left unaddressed, can seriously damage your apartment and the one below it. 

6. Seek relief for a too-hot apartment

If your apartment is too hot, even with the radiators off, one suggestion is to put inexpensive fiberglass pipe covers around your pipes to keep them from adding to the temperature.

Matalka suggested contacting the building manager or super and asking them to lower the heat. Others in the building might feel the same way. 

Opening a window to bring in cold air is another time-tested option. The downside, Matalka said, is that it isn’t great for the environment. “You’re throwing away heat that was generated by burning fossil fuel, which in turn releases greenhouse gases into the atmosphere,” he said. That certainly won’t help your building’s Local Law 97 emissions goals.

If the heat leaves you with dry skin, humidifiers can help. Warm-mist and cool-mist humidifiers do the same thing, although pets and small children can get hurt by warm-mist machines. 

—Earlier versions of this article contained reporting and writing by Lucy Cohen Blatter, Georgia Kral, Emily Myers, and Jennifer White Karp. It was updated in 2026 by Evelyn Battaglia.





Source link