It won’t be long until Linux enthusiasts will be able to complete a clean kernel build in under 10 seconds. Linux expert and Phoronix head honcho Michael Larabel said that “the coffee window is closing” in recent commentary that weighs computer processor advances and human / AI optimizations of the Kbuild code. What once used to be a computer processing task that provided a decent excuse for a coffee break now only allows enough time for a measured sip.
The source site’s determined Linux focus has meant that OS kernel compilation times have become a signature benchmark over the last two decades. Larabel notes that this once time-consuming process “can be done in now roughly 15 seconds.” It isn’t just advances in hardware and core counts pushing the envelope; compiling a defconfig x86-64 Linux kernel build has had many bottlenecks removed thanks to the work of Linux MM developer Lorenzo Stoakes and the assistance of AI/LLMs recently. Even modest processors have seen their compile times cut dramatically thanks to this work.
Larabel went hands-on with the latest v4 kernel patches from Lorenzo, and armed with his very powerful EPYC workstation, achieved “a 15-second kernel build!” Before the latest patches, the same system took over 22 seconds for the same compilation task.
Latest Videos FromTom’s Hardware
The test system is extremely potent, though. Your home PC or laptop might still let you have enough time to go brew some coffee, as Larabel’s test rig features the following components:
Samsung PM1743 3.84TB PCIe Gen 5.0 NVMe SSD storage
Stock Ubuntu 26.04 LTS
It is noted that the code compilation benchmarking didn’t employ a RAMdisk to aggressively tune the compile times
All the above timings mentioned are for the minimal default kernel compilation for x86-64 systems. The Phoronix chief also timed the compilation of a Linux kernel with ‘allmodconfig’ with thousands of drivers and subsystems enabled. This precipitates far longer compile times. On the above beefy system, though, the latest Lorenzo patches drove the time down from 169 seconds to 134 seconds. So, this other milestone is approaching the two-minute mark.
Phoronix is now taking bets on AMD (Zen 6) EPYC 9686F systems, with MRDIMMs and PCIe Gen6 storage pushing defconfig x86-64 Linux kernel compilation times under the 10-second mark.
Get Tom’s Hardware’s best news and in-depth reviews, straight to your inbox.
Developers of SharpEmu — an experimental, open-source PS5 emulator — have successfully run PS5 games at a playable 60 FPS on the emulator. According to an X post on September 25, the developers reached this milestone for six of 55 titles tested, with 12 — including the six playable — reaching gameplay. According to the developer, the six games are yet to be tested from start to finish; the “playable” designation means the games currently run without issues, although minor graphical or audio issues may persist in some.
The six 60 FPS titles are Dreaming Sarah, Void Terrarium, New Joe & Mac: Caveman Ninja, Tetris Forever, Hoa, and Tomb Raider IV-VI Remastered. The breakthrough was achieved with SharpEmu v0.0.4-release.2, the emulator’s latest public build released on September 25. According to developers, the build includes upgrades such as improved SPIR-V shader translation and updated Vulkan API support.
Developed in C#, the SharpEmu PS5 emulator supports Windows, Linux, and macOS and uses Vulkan and MoltenVK for graphics API calls. PlayStation 5 relies on an AMD Zen 2 x86-64 CPU architecture; therefore, SharpEmu can execute the console’s CPU instructions natively on a standard PC rather than translating them from an unfamiliar instruction set. The emulator focuses on loading a game’s eboot.bin executable and required system modules, partially handling kernel functions, and processing the game’s shader, resource, and AGC graphics submissions.
Latest Videos FromTom’s Hardware
For now, SharpEmu is still far from handling demanding 3D titles, with only 12 of 55 tested titles reaching a game ready state. Of those 12, only six performed cleanly enough to be designated as “playable” at a full 60 FPS. The developers stress that SharpEmu is still in its early stages, noting that “SharpEmu is an experimental emulator intended for research and educational purposes. This project does not contain any copyrighted system firmware, game data, or proprietary PlayStation assets.” Meanwhile, another emulator, KytyPS5, recently ran the PS5 version of GTA V at roughly 40 to 60 FPS on a high-end Ryzen 9 9950X3D and Radeon RX 7900 XT system, crashing after the game’s opening mission.
Our expert reviewers spend hours testing and comparing products and services so you can choose the best for you. Find out more about how we test.
Gigabyte Technology hardly needs an introduction to anyone who has built a PC in the last three decades. Founded in Taipei in 1986, the company grew into one of the largest motherboard and graphics card manufacturers in the world, and its AORUS brand has become a fixture of the enthusiast market. Power supplies are a comparatively recent and more modest part of its business. Like nearly every PC brand, Gigabyte does not manufacture its own PSUs. Instead, it sources platforms from established OEMs and sells them under its UD, P-series and AORUS lines. The results have been uneven over the years, with some very good units and a few that left a lot to be desired, so the OEM and the target audience behind each model matters more than the badge on the box.
The Gaming GM PG5 series is Gigabyte’s newest attempt to cover the upper mainstream, and the 1000W model in review today is something of a spiritual successor to the popular UD1000GM PG5. We look closer to determine how it ranks among our best power supplies list. It is built by HEC, a long-established Taiwanese OEM. It is fully compliant with the ATX 3.1 and PCIe 5.1 design guides and comes with a native 12V-2×6 connector, a 135 mm fluid dynamic bearing fan, and (according to Gigabyte) 100% Japanese capacitors.
The headline feature, though, is T-Guard, a thermal monitoring system for the 12V-2×6 connector that can cut power to the graphics card if the connector starts overheating. The T-Guard signifies Gigabyte’s proposed solution to the known PCIe 5.1 connector overheating problem that almost every manufacturer has been trying to implement a defense against. Curiously, Gigabyte markets the unit with 80 PLUS Gold logos, even though it has received Platinum certifications from both CLEAResult (80 PLUS) and Cybenetics. It is also available in white as the 1000GM PG5 ICE, comes with a ten-year warranty, and retails for $170 at the time of this review.
Latest Videos FromTom’s Hardware
Specifications and Design
Swipe to scroll horizontally
Gigabyte Gaming 1000GM PG5 Power specifications ( Rated @ 50 °C )
RAIL
+3.3V
+5V
+12V
+5Vsb
-12V
MAX OUTPUT
20A
20A
83.3A
3A
0.3A
Row 1 – Cell 0
120W
120W
1000W
15W
3.6W
TOTAL
1000W
Row 2 – Cell 2
Row 2 – Cell 3
Row 2 – Cell 4
Row 2 – Cell 5
AC INPUT
100 – 240 VAC, 50 – 60 Hz
Row 3 – Cell 2
Row 3 – Cell 3
Row 3 – Cell 4
Row 3 – Cell 5
MSRP
$170
Row 4 – Cell 2
Row 4 – Cell 3
Row 4 – Cell 4
Row 4 – Cell 5
In the Box
The Gaming 1000GM PG5 arrives in a black and orange cardboard box with a large render of the unit on the front, next to the model name and a bold orange “1000W” print. A row of small icons along the bottom highlights the ATX 3.1 and PCIe 5.1 compatibility, the fully modular design, the Japanese capacitors, the smart fan, and T-Guard, while an 80 PLUS Gold badge sits at the top right corner. It is a flashy, gaming-oriented design, which is fitting given the name of the series.
(Image credit: Tom’s Hardware)
The bundle is very basic. Other than the unit itself, we only found the AC power cord, four black cable ties, and a multilingual user manual. There are no Velcro straps and no cable combs. Strangely, there were not even mounting screws in our sample’s box. For a $170 1000W unit, that is on the stingy side of things, although it hardly matters for the actual quality of the product, and most builders probably already have a drawer full of these things.
(Image credit: Tom’s Hardware)
All of the cables are modular, including the 24-pin ATX cable. Gigabyte went with black, flat “embossed” cables, where every wire is individually insulated, but the wires are bound together into a ribbon. They are flexible and easy to route, and they look considerably better than plain flat cables. The single native 12V-2×6 cable has a dual-color connector, with a light grey front section that makes a partially seated plug easy to spot, and it is rated for 600W.
(Image credit: Tom’s Hardware)
Swipe to scroll horizontally
Gigabyte Gaming 1000GM PG5
Connector type
Hardwired
Modular
ATX 24 Pin
–
1
EPS 4+4 Pin
–
2
EPS 8 Pin
–
–
PCI-E 5.1
–
1
PCI-E 8 Pin
–
4
SATA
–
8
Molex
–
4
Floppy
–
–
External Appearance
The chassis of the Gaming 1000GM PG5 measures 150 x 150 x 86 mm (L x W x H), which are slightly larger than the typical dimensions of a standard ATX unit. Still, at 150 mm long, it will fit in virtually every ATX case, although the length means that very compact builds may be a little tight once the modular cables are installed. The design is more elaborate than most PSUs in this price range. The upper part of the chassis is finished in a dark metallic gunmetal grey, while the lower part and the front and rear faces are matte black.
Get Tom’s Hardware’s best news and in-depth reviews, straight to your inbox.
(Image credit: Tom’s Hardware)
The sides carry a large embossed “GAMING” logo along with the Gigabyte name and the wattage, and the fan grille is a perforated octagonal area with the Gaming series logo at its center, with four exposed screws at the corners. The specifications sticker is placed on the side opposite the fan.
(Image credit: Tom’s Hardware)
The rear face of the unit is almost entirely perforated with a honeycomb pattern, and there are only the on/off switch and the AC receptacle. There is no switch to control the semi-passive fan mode. It is always active. The modular panel on the front is clean and clearly labelled, with four sockets for the CPU and PCIe cables, three sockets for the peripheral and SATA cables, the 24-pin motherboard sockets and the non-standard 12V-2×6 cable socket, which is placed separately at the bottom left corner.
Image 1 of 2
(Image credit: Tom’s Hardware)
(Image credit: Tom’s Hardware)
T-Guard is the major update over the UD1000GM PG5, and a feature Gigabyte clearly is relying on to market the unit. According to Gigabyte, precision thermistors monitor the temperature of the 12V-2×6 connector in real time, and if an abnormal temperature rise is detected, the system cuts power to the graphics card while keeping the rest of the system running. If the CPU has integrated graphics and the monitor is connected to the motherboard, the user can continue working and save any progress before shutting down, and a reboot is required to restore power to the GPU.
The UD1000GM PG5 had nothing similar. It relied solely on the typical protection features of every PSU, which do nothing against a single overheating connector, as current is spread across many pins and the total draw never approaches the OCP limit. Monitoring the temperature directly addresses the actual failure mode behind the melting connectors that have plagued high-end graphics cards over the past few years, and it is a lot more meaningful than yet another marketing badge. The concept is sound and, as a concept, it should work, unless the temperature increase on the connector is very abrupt and the position of the sensor does not allow it to react in time.
Internal Design
The cooling fan is a Hong Hua HA13525H12SF-Z, a 135 mm fluid dynamic bearing (FDB) fan rated at 0.50A. Hong Hua fans are very common inside mainstream PSUs, are reliable, and should easily last through the ten-year warranty. The larger 135 mm diameter allows the fan to move the same amount of air at lower speeds than a 120 mm fan, which pays off in the acoustics department and probably the main reason why the designer chose to push the chassis to 150 mm, as the 135 mm fan does not fit in a 140 mm chassis. A clear plastic sheet under the fan guides the airflow across the heatsinks.
(Image credit: Tom’s Hardware)
The OEM behind the Gaming 1000GM PG5 is HEC, a manufacturer that has been producing power supplies for decades and has built units for many renowned brands. The platform is modern, with good-sized two-prong heatsinks for the active components, and a clean, well-spaced layout that helps with airflow. The transient filtering stage starts on a small PCB right behind the AC receptacle and continues on the main board, with four Y capacitors, three X capacitors, two filtering inductors, and a MOV, which is more than a complete filter for a unit of this class. An NTC thermistor and a bypass relay provide inrush current protection. There are two bridge rectifiers, mounted on their own relatively large dedicated heatsink.
(Image credit: Tom’s Hardware)
The APFC stage uses three CRJW125N60G2F MOSFETs and a boost diode. The coil is fully enclosed and the bulk capacitor is a single 680 μF / 400 V unit from Toshin Kogyo (TK), a respected Japanese manufacturer, rated for 105 °C. The primary inversion stage consists of two NCE 65TF099F MOSFETs on a dedicated heatsink, forming a half-bridge LLC resonant topology. It is a simple, mature, and efficient arrangement that is found in the majority of high performance units today.
(Image credit: Tom’s Hardware)
On the secondary side, the 12V rail is generated by six unidentifiable MOSFETs in a synchronous rectification arrangement. The 3.3V and 5V rails are generated by DC-to-DC converters on a vertical daughterboard. Gigabyte’s claim of 100% Japanese capacitors is accurate. All of the electrolytic and polymer capacitors on the secondary side are supplied by TK as well, which is a welcome sight in a $170 unit, and it is excellent news for its long-term reliability.
Image 1 of 2
(Image credit: Tom’s Hardware)
(Image credit: Tom’s Hardware)
Cold Test Results (25°C Ambient)
Cold Test Results (25°C Ambient)
For the testing of PSUs, we are using high-precision electronic loads with a maximum power draw of 2700 Watts, a Rigol DS5042M 40 MHz oscilloscope, an Extech 380803 power analyzer, two high-precision UNI-T UT-325 digital thermometers, an Extech HD600 SPL meter, a self-designed hotbox, and various other bits and parts.
At 25 °C ambient, the Gaming 1000GM PG5 performs much better than the Gold logo on its box suggests. It averaged 92.6% at 230 VAC and 90.6% at 115 VAC across the nominal load range, peaking at 93.8% (230 VAC) at about 50% load and 92% (115 VAC) at about 30% load. Even at a sustained 1000W, efficiency was 91.0% and 88.5%, respectively. This is Platinum-level performance, and it is consistent with both certifications the unit actually holds: 80 PLUS Platinum from CLEAResult and ETA Platinum from Cybenetics. Why Gigabyte chose to market it as a Gold unit is anyone’s guess.
The thermal and acoustic performance balance is impressive. The fan remains completely stopped up to about 30% load (roughly 300W), which covers most desktop work. Once it starts spinning, it barely gets audible up to 500W, where it reaches about 33 dB(A). From there it ramps up gradually, reaching 36.4 dB(A) at 600W and about 41 dB(A) at 800W, before climbing to 48.2 dB(A) at a sustained 1000W. That last figure is loud, but it is hardly a load most systems will continuously sustain. Thermally, the unit maintains very low and safe operating temperatures.
Hot Test Results (~45°C Ambient)
Hot Test Results (~45°C Ambient)
Inside our hotbox, at roughly 45 °C ambient, efficiency drops by just 0.8%, averaging 91.8% at 230 VAC and 89.8% at 115 VAC, with full load figures of 89.9% and 87.4% respectively. That is a very small degradation for a 20 °C increase in ambient temperature, which is a testament to the quality of the components and their resilience to adverse operating conditions.
The fan is a slightly different story. It still stays off up to about 300W, but it starts at a higher speed and ramps up much faster, reaching 38.3 dB(A) at 500W and 47.2 dB(A) at 800W. At a sustained 1000W, the fan climbs to 54.5 dB(A), practically the maximum, as the fan reaches its top speed, which is very loud and very noticeable in any system. In return, the internal temperatures stay very low, with the primary and secondary heatsinks reaching just 88°C and 82°C respectively at full load. These are high figures, but they are reasonable for a unit operating at its maximum output in a 45°C environment, and the unit’s components are very capable of handling them. Gigabyte clearly favored longevity over everything else.
PSU Quality and Bottom Line
Power Supply Quality
Voltage regulation is good on the minor rails and average on the 12V rail. Across the 20% to 100% load span, the 3.3V and 5V rails moved by just 0.5%, which is exceptional. The 12V rail regulation is 1.3% – not a class leading figure, but not a bad result either. The ripple suppression is very good. The 12V rail peaked at 48 mV at full load, while the 3.3V and 5V rails did not exceed 26 mV under any condition. Against the 120 mV and 50 mV ATX design limits, that is 60% headroom on the 12V rail and 48% on the minor rails. Several premium platforms can do better, but these figures are far from unacceptable on a mainstream PSU.
During our thorough assessment, we evaluate the essential protection features of every power supply unit we review, including Over Current Protection (OCP), Over Voltage Protection (OVP), Over Power Protection (OPP), and Short Circuit Protection (SCP).
All protection mechanisms were verified and triggered correctly during testing. With the unit hot, OCP tripped at 136% (27.2A) on both the 3.3V and 5V rails, and at 120% (100A) on the 12V rail, while OPP shut the unit down at 116% of its rated output, or about 1160W. These are tight thresholds for a 1000W unit, yet not too tight, as expected from an ATX 3.1 compliant unit.
Swipe to scroll horizontally
Main Output
Load (Watts)
202.97 W
Row 0 – Cell 2
505.34 W
Row 0 – Cell 4
752.16 W
Row 0 – Cell 6
1001.94 W
Row 0 – Cell 8
Load (Percent)
20.3%
Row 1 – Cell 2
50.53%
Row 1 – Cell 4
75.22%
Row 1 – Cell 6
100.19%
Row 1 – Cell 8
Row 2 – Cell 0
Amperes
Volts
Amperes
Volts
Amperes
Volts
Amperes
Volts
3.3 V
1.85
3.35
4.62
3.35
6.93
3.34
9.24
3.33
5 V
1.85
5.12
4.62
5.11
6.93
5.1
9.24
5.1
12 V
15.39
12.17
38.47
12.12
57.71
12.02
76.94
12.01
Swipe to scroll horizontally
Line
Regulation
Voltage Ripple (mV)
Row 1 – Cell 0
(20% to 100% load)
20% Load
50% Load
75% Load
100% Load
CL1 12V
CL2 3.3V + 5V
3.3V
0.5%
20
22
22
26
24
26
5V
0.5%
20
22
24
26
22
26
12V
1.3%
30
32
38
48
46
38
Bottom Line
The Gigabyte Gaming 1000GM PG5 is a well-rounded power supply, and one that Gigabyte seems to undersell. The HEC platform is modern and well designed, the component selection includes Japanese capacitors all around, which is a welcome sight at this price point, and the unit is fully compliant with the latest ATX 3.1 and PCIe 5.1 design guides. It is evident that Gigabyte favored longevity and reliability over squeezing out every last bit of electrical performance, and for a mainstream 1000W unit, that is a very reasonable priority.
(Image credit: Tom’s Hardware)
T-Guard deserves a special mention, as it is the major update over the UD1000GM PG5 and the reason most people will notice this unit. It is Gigabyte’s answer to the known 12V-2×6 connector overheating problem, which almost every manufacturer is currently trying to find a defense against. By monitoring the connector temperature and cutting power to the GPU if something goes wrong, while keeping the rest of the system alive, it targets the actual failure mode instead of relying on protections that were never designed for it. As a concept, it should work, unless the temperature rise is very abrupt and the position of the sensor does not allow it to react in time. Even so, for anyone planning to run a power hungry graphics card, it is a reassuring addition.
Efficiency is where the unit shines. It is Platinum-level efficient, as confirmed by our testing and both the 80 PLUS and Cybenetics certifications, which makes Gigabyte’s decision to market it with Gold logos rather strange. The rest of the electrical performance is average for its class, with good minor rail regulation, a decent 1.3% on the 12V rail, and ripple that is comfortably within the ATX limits, if not remarkable. The balance between temperatures and noise is very good. At room temperature, the fan is barely audible up to 500W, and the internal temperatures remain low and safe, even inside our hotbox, where efficiency barely degraded.
(Image credit: Tom’s Hardware)
The compromises are few. The fan gets very loud under sustained heavy loads in hot environments, practically reaching its top speed at full load, and the bundle is bare, lacking even mounting screws. The 150 mm long chassis, a consequence of the 135 mm fan, may also be a little tight in very compact cases. None of these are serious issues, as the vast majority of gaming systems will rarely push the unit hard enough for the fan to become a nuisance.
With a price tag of $170 at the time of this review and a ten-year warranty, the Gaming 1000GM PG5 represents good value, but it does not stand out across the board. Against other 1000W units in the same price range, such as the Corsair RM1000x, the MSI MAG A1000GL PCIE5 and the Montech Century II 1050W, it provides average all-around electrical performance, so buyers should not expect a noticeable difference in regulation or ripple. Where it pulls ahead is efficiency, as its Platinum-level figures are great for the class, and it also offers a good balance between temperatures and noise, with all-Japanese capacitors and T-Guard as extra reasons to pick it. For a gaming system built around a demanding graphics card, especially one with a 12V-2×6 connector, that combination makes the Gaming 1000GM PG5 a very sensible 1000W choice, even if it is not a clear winner in every category.
A chrysophile has ordered a special edition mini PC with a pure 24-carat gold passive chassis reports Fanless Tech. It’s a premium custom version of the ~5-inch (120 x 120 x 120mm) Kubb Fanless PC, but costing around $1.7 million with its opulent gold chassis. As well as its choice of materials pumping up price, this mini PC’s weight has increased from its default 4.6 to 28.7 pounds (2.1kg to 13kg). But as a bonus, which probably still doesn’t make it worth it for most folks, gold has significantly better thermal conductivity than aluminum.
A rich client asked for a solid gold Kubb Fanless and it’s a cooling marvel https://t.co/QyPMRKefTz pic.twitter.com/a9hIdznNYwSeptember 25, 2026
In its social media post, Fanless Tech calls the Kubb Fanless in gold a “cooling marvel.” Its news post on the topic elaborates on this claim, explaining that the thermal conductivity of gold is “about 30% to 50% faster than aluminum.” That might help its Core Ultra chip perform a bit better, all else being equal. However the sacrifice to portability, as this compact gold PC is over 6x heavier, could be a major drawback. As well as the price.
We looked up the thermal conductivity of aluminum and gold, as well as some other common materials. The chart below could be useful for your own passive computing projects.
Latest Videos FromTom’s Hardware
Swipe to scroll horizontally
Thermal conductivity comparison chart
Material
Thermal conductivity (W/m K)
Diamond
1,000
Silver
406
Copper
385
Gold
314
Aluminum
205
Iron
79
Glass
0.8
Brick
0.6
Wood
0.1
Polyurethane
0.02
In contrast to its gilded construction, this mini PC’s specs are very modest. Standard configurations of the Kubb Fanless are as follows:
Intel Core Ultra 5 225H, or Intel Core Ultra X7 358H, or AMD Ryzen AI 5 340
16GB DDR5, up to 128GB
1TB M.2 NVMe SSD, optional second M.2 SSD
Intel: 1x USB 3.2 (Type A), 1x USB 3.2 (Type-C, DP1.4a), 1x USB4/Thunderbolt 4 (Type-C, DP 2.1), Wi-Fi 7, Bluetooth 5.4
AMD: 1x USB 3.2 Gen2 (Type A), 2x USB4 (Type-C, DP 1.4a), Wi-Fi 6, Bluetooth 5.3
Side ports: 2x Port RJ45, 2x HDMI 2.1 TMDS, 2x USB 3.2 Gen 2 (Type A)
19V DC, 6.32A, 120W power adapter (100–240V AC)
Windows 11 Pro
3 years guarantee
Kubb Fanless mini PCs are usually made from aluminum, and finished in graphite, blue, or bronze. With an Intel Core Ultra 5 225H at their heart, all those colors are all listed at €1,595 ($1,822) at Kubb.eu, but there is no stock. At that kind of price, the Arctic Senza AI 370 we tested earlier in the year looks like it would be a knockout passive computing competitor. We aren’t sure if Arctic would accept the 24 carat gold chassis special order, and the Senza is designed for discrete under-desk-mounted silence.
We previously reported on the fanless Kubb Mini range of 3 x 3 x 3-inch mini PCs which packed Intel Twin Lake chips, came in cute/bright color finishes, and were priced around $500 (€430).
As the memory crisis continues to push up component prices, laptop prices are also rising, making even mainstream models increasingly expensive. However, if you are looking for the right combination of portability and performance, the HP Omen Transcend 14 is currently on sale. The 14-inch powerhouse is available at $1999.99 for a limited period, down from its listed price of $2999.99 at Best Buy, which is a massive saving of $1000.
The HP Omen Transcend 14 is one of the rare compact gaming laptops packing a powerful set of hardware. This particular configuration comes with Intel’s Core Ultra 9 285H processor, paired with 32GB of LPDDR5x memory and an Nvidia RTX 5070 Laptop GPU with 8GB of GDDR7 VRAM. For storage, there is a 1TB PCIe Gen 4 NVMe SSD, while the laptop ships with Windows 11 Home. The combination should make it capable of handling modern games as well as demanding workloads such as video editing and other content-creation tasks.
A highlight feature of the laptop is the 14-inch 3K OLED display, which has a 2880 x 1800 resolution and a 120 Hz refresh rate. The panel supports a 48-120Hz variable refresh rate, covers 100% of the DCI-P3 color gamut, and offers up to 500 nits of HDR brightness, making it suitable for both gaming and content creation.
Despite packing high-end hardware, the Transcend 14 remains relatively portable, measuring around 0.7 inches thick and weighing about 3.6 pounds. In terms of ports, it comes with Thunderbolt 4, USB-C with DisplayPort and power delivery, HDMI 2.1, and a USB-A port. The laptop also comes with a four-zone RGB backlit keyboard, while the 71 Wh battery is claimed to last up to 14 hours on a full charge.
Considering the premium hardware and compact footprint, the HP Omen Transcend 14 at $1,999.99 is a deal worth considering. The $1,000 discount from its $2,999.99 listed price makes it a considerably more affordable proposition. However, you’ll need to move fast, as the deal price is only available for a few hours.
PlusAI, an autonomous trucking startup, is working with Nvidia to develop its systems and has several trucks and trailers marked with the logos of both companies. This likely caught the attention of thieves who were looking to score big on AI GPUs, with Wired reporting that two of the startup’s trailers got stolen and were found at another location. However, the joke’s on the criminals, as they discovered that the two stolen units contained 20,000 pounds of sand each.
The AI data center construction boom has made PC components like RAM and GPUs insanely expensive, which has led to a rise in petty theft involving these components. Enterprises and startups are being targeted, too, especially as they build data centers and local AI servers with millions of dollars’ worth of equipment and hardware. We’ve already seen cargo heists of copper cable and other hardware worth $1.3 million, while other criminals have become more brazen, pushing or spinning security escorts off the road so they can get away with a truck’s worth of AI GPUs.
While PlusAI is partnered with Nvidia, it also uses simulated cargo loads for real-world tests, allowing the company to model how a fully loaded semi-trailer would react to various road conditions. The startup’s truck cabs, which likely had advanced AI hardware installed, were parked securely inside its warehouse, while the trailers were apparently left outside and secured with hand locks. “PlusAI uses simulated loads in its trailers to assist with research and development testing,” company spokesperson Lauren Kwan told Wired, adding that they were recovered with “40,000 pounds of sand intact.”
Latest Videos FromTom’s Hardware
Interestingly, the discovery of the theft was accidentally made by one of the startup’s top executives, who received a message from an acquaintance saying that they saw the trailers, which they described as “trucks,” near their workplace. This likely got the executive concerned, as that location was half a mile away from PlusAI’s warehouse, which led to the cops getting called. As for the prospective criminals, they probably left the crime scene disappointed — they thought they were getting a huge payday from two truckloads’ worth of smart silicon, but they ended up with 20 tons of dumb sand instead.
A week and change ago, the U.S. Congress saw yet another anti-piracy bill introduced, H.R. 10364, or by its full name, the American Copyright Protection Act of 2026 (ACPA). It would require internet service providers, DNS resolving services, and virtual private networks, or VPNs, to block foreign websites or services hosting pirated content. The full text for the bill is now public, and it stands out due to its targeting of foreign services and affecting connections “from the United States.” That gets complicated pretty quick when VPNs and content delivery networks (CDNs) are in play.
In ACPA, a standard blocking order needs to be court-issued, but would apply in 14 to 30 days. There’s a special case seemingly targeted at live-streaming of sports events and shows, or “time-sensitive events” in legal parlance, which can shorten the blocking deadline as a judge sees fit, so long as the first leak of copyrighted material appears within 24 hours after going live.
Blocking at the ISP and DNS level is relatively straightforward. The vast majority of users utilize their ISP’s DNS, so not resolving a given domain if it’s in the blocklist for its customers is simple enough. Some people, like yours truly, rely on external DNS servers like Google DNS, Cloudflare’s 1.1.1.1, OpenDNS, or NextDNS. These too could ignore specific DNS resolution requests from incoming users in the States, the accuracy of geolocation notwithstanding.
Latest Videos FromTom’s Hardware
Small ISPs and services with less than 100,000 monthly users and public networks are exempted, as are root DNS and top-level domain (TLD) providers. However, the bill does not specify an exact means of blockage, and it’s possible that service providers, out of fear of liability, may well take a heavy-handed approach. It also makes no mention of protecting or nullifying encryption.
When it comes to people using VPNs to bounce their connection through another location, things get tricky, as the bill does not clearly state what “from the United States” means, and even the definition of “foreign” can get fuzzy. Determining those might well be an exercise in quantum superposition, since any of the below scenarios can be argued to technically fulfill a criteria. We conjured up a handful of possibilities, though we’re sure creative techies can come up with many more:
A connection to a VPN originates from the U.S.
A VPN’s endpoint resides in the U.S.
A VPN’s registered subscriber is a U.S. person, but they are currently outside the U.S.
The user uses a VPN to a foreign country, but connects to a website that’s behind a CDN — does the CDN endpoint count as a destination?
Same, but the actual website is on U.S. soil despite being accessed from outside; is it “foreign” if the endpoint is?
For multi-hop VPNs, which hop or hops count towards determining a destination, especially if the traffic passes through the U.S. at some point?
A U.S. citizen in a boat in international waters using Starlink (a U.S. satellite ISP) counts as foreign?
A U.S. citizen goes abroad and uses roaming; are they considered foreign due to their physical location, or within the U.S. because they are using stateside infrastructure?
Additional legal questions can be raised with other technological factors. The use of shared IPs in hosting services, or CGNAT implementations, can create obfuscation of the concepts of “destination” and “origin.” Is a DNS provider using Oblivious DoH, where the server responds to a request but doesn’t know who made it and vice versa, liable? How does Apple’s iCloud Private Relay feature, which hides a connection’s source and destination from each other, sit within the legal framework? And with encrypted DNS, how much is the ISP liable, since they can’t see which domain the user requested?
The neutrality of third-party service providers has come under fire in jurisdictions like France and Spain, where rulings mostly went against claims of neutrality. Some were forced to often enable large-scale blocking, an action likely to trigger more than a few false positives. A Spanish court ruled against Cloudflare and RootedCON for their part in providing CDNs, resulting in mass IP blockings. Over in France, a court found that VPNs do have to comply with blocking orders despite their job as “technical intermediaries.”
For what it’s worth, ACPA is only one of multiple bills sitting in Congress in the “introduced” state, and currently appears to have no sponsors, scheduled hearings, or even markup. If foreign activities are any indication, though, broad legislation like this may have substantial unintended consequences.